Production and Marketing of Local Sawn Timber in Nabire District, Middle Papua Province, Indonesia
DOI:
https://doi.org/10.59573/emsj.8(3).2024.43Keywords:
Local sawn timber, production, demand, Nabire, Middle Papua provinceAbstract
Local sawn timber is a term used to describe the timber produced using chainsaw and circular saw as the main tool and distributed locally for private and public or community utilization purposes. This research highlights the production process, distribution/marketing, and sizes of the local sawn timber produced at Nabire district, the Middle Papua Province. Legal permits to harvest trees from the forest and distribute the local sawn timber are also discussed. The Middle Papua province is a new province officially governed in 2022, where public and private facilities built heavily depend on the local sawn timber for the main material construction here. The results indicate that during 2022, the HTP permits are 97 in total distributed at 6 sub-districts in Nabire district. These cover 194 ha forest areas and allow to harvest timber with volume of 1,940 m3 for single year, and this HTP permit is applied only for the indigenous people or community of Papua. The MTP permits are 23 distributed at 6 sub-districts and marketed for total volume of 7,094 m3, consisting of Merbau, Meranti, Rimba campuran (mixed species) and kayu indah (fancy wood) timber species groups. The HTP is taking place at the forest site and the MHP is undertaken at the outsite forest areas or saw mill site. Merbau is the most harvested timber from the forest under the HTP permit, but Rimba campuran and Meranti are the most abundant timber species distributed and marketed under the MTP permits.
Nabire district had various timber sizes for raw material of the local sawn timber, which is mostly in the form of timber square with 4-meter length with the wide vary from 15-30 cm and the thickness from 10-25 cm. These sizes are different with those produced in Manokwari and Teluk Bintuni districts. However, the local sawn timber in general had similarity in sizes and timber species. In conclusion, the local sawn timber production and distribution in Nabire district at the Middle Papua province are delivered using two different permits, the HTP for harvesting and the MTP for distributions. The raw material of the local sawn timber in this place are from the forest in the form of the timber square beam with vary in their wides and thicks.
References
Aronggear, A. B., Ungirwalu, A., & Wahyudi. (2021). Tren Produksi Kayu Bulat Iuphhk Dan Kontribusinya Terhadap Penerimaan PNBP Sektor Kehutanan Di Provinsi Papua. 15.
Djarwanto, Ratih, D., Jamal, B., Elfrida, B., Jasni, I.M., S., Andianto, D. Martono, Gustan, P., Adang, S., Mardiyansah, & Krisdianto. (2017). Pengelompokan Jenis kayu Perdangan Indonesia. FORDA Press.
Peraturan Menteri Kehutanan Nomor:55/Menhut-II/2006 tentang Penataan Hasil Hutan Yang Berasal dari Hutan Negara. Kementrian Kehutanan.
Kuswandi, R., Sadono, R., Supriyatno, N., & Marsono, D. (2019). Model Pengelolaan Hasil Hutan Kayu Oleh Masyarakat Adat: Studi Kasus Pemilik Hak Ulayat Di Kabupaten Teluk Bintuni. Jurnal Kehutanan Papuasia, 1(1), 11–17. https://doi.org/10.46703/jurnalpapuasia.Vol1.I.1.24
Marwa, J., & Werimon, S. (2018). Evaluasi Sistem Kompensasi Kayu Hutan Produksi pada Hak Ulayat Suku Sougb, Kabupaten Teluk Bintuni, Papua Barat. Jurnal Ilmu Kehutanan, 12(1), 74. https://doi.org/10.22146/jik.34122
Merindakang, N. M., Wahyudi, & Nugroho, J. D. (2022). Estimasi Produksi Dan Peredaran Kayu Olahan Lokal Berdasarkan Penerbitan Ijin Pemungutan Hasil Hutan Kayu Di Provinsi Papua Barat. Jurnal Kehutanan Papuasia, 8(1), 55–66.
Peraturan Gubernur Papua Barat No 51 tahun 2018 tentang Peredaran Hasil Hutan Kayu Bulat di provinsi Papua Barat.
Peraturan Gubernur Papua Barat Nomor 5 Tahun 2014 tentang Standar Pemberian Kompensasi Bagi Masyarakat Adat Atas Kayu Pada Areal Hak Ulayat di Provinsi Papua Barat.
Peraturan Gubernur Papua Nomor 65 tahun 2019 Tentang Ijin Pemungutan Hasil Hutan Kayu di Provinsi Papua.
Peraturan Menteri Kehutanan Nomor: P.55/Menhut-II/2006.
Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor P.64/MENLHK/SETJEN/KUM1./12/2017 tentang Penetapan Harga Patokan Hasil Hutan untuk Perhitungan Provisi Sumber Daya Hutan dan Ganti Rugi Tegakan. Kementrian Lingkungan Hidup dan Kehutanan.
Triestini, Y., Nugroho, B., & Siburian, R. H. S. (2020). Trend PNBP sektor kehutanan Provinsi Papua Barat pasca implementasi kebijakan si-puhh online dan self assesment. Cassowary, 3(1), 1–10. https://doi.org/10.30862/casssowary.cs.v3.i1.33
Wahyudi. (2013). Dasar-Dasar Penggergajian Kayu. Pohon Cahaya Yogyakarta.
Wahyudi, Rettob, B.B., & Wospakrik, F. (2017). Pengujian Sifat Mekanis Kayu Lulu (Celtis latifolia Planc) pada Dua Kondisi Kadar Air asal Manokwari Papua Barat. Jurnal Ilmu dan Teknologi Kayu Tropis, 15(1), 68-74.
Wahyudi, W., Tokede, M. J., Mardiyadi, Z., Tampang, A., & Mahmud, M. (2014). Customary Right Compensation and Forest Villages Development Programs of Mangrove Company at Bintuni Bay Papua Barat. Jurnal Manajemen Hutan Tropika (Journal of Tropical Forest Management), 20(3), 187–194. https://doi.org/10.7226/jtfm.20.3.187
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Terms and conditions of Creative Commons Attribution 4.0 International License apply to all published manuscripts. This Journal is licensed under a Creative Commons Attribution 4.0 International License. This licence allows authors to use all articles, data sets, graphics and appendices in data mining applications, search engines, web sites, blogs and other platforms by providing appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
A competing interest exists when professional judgment concerning the validity of research is influenced by a secondary interest, such as financial gain. We require that our authors reveal all possible conflicts of interest in their submitted manuscripts.
The Editor reserves the right to shorten and adjust texts. Significant changes in the text will be agreed with the Authors.
ISSN 
