Plastic Bottles Filled with Fully Saturated On-Site Soil Material for Slope Stabilization

Ajimar S. Borlan

doi:10.59573/emsj.9(1).2025.22

Автор(и)

Ajimar S. Borlan

DOI:

https://doi.org/10.59573/emsj.9(1).2025.22

Ключові слова:

slope stabilization, plastic bottles, erosion control, soil stabilization, sustainable construction

Анотація

This study focuses on the feasibility of employing plastic bottles filled with fully saturated on-site soil for sustainable slope stabilization. Also, this research explores material preparation, mechanical performance, and environmental benefits addressing the global plastic waste crisis and the need for cost-effective erosion control. To ensure a robust testing framework, soil assessment, collection, and saturation procedures were standardized. Correspondingly aligned to ASTM D695 for compressive strength tests the structural integrity of the soil-filled bottles, and ASTM D792 for density assessments to validate soil compaction. Field implementation was carried out on erosion-prone slopes in the Province of Antique involving strategically arranging and securing the bottles. Compared to conventional methods, results prove that the innovative method can provide sufficient structural support at a substantial cost reduction of 92.89%. This study aligns with the UN Sustainable Development Goal 9 which demonstrates the potential of repurposing plastic waste into a sustainable and economically viable alternative for slope protection. Thus, in managing steep terrain, preventing erosion, and promoting environmental sustainability in resource-limited settings; this innovative approach offers a practical solution. To explore long-term durability, material variability, and potential microplastic leaching, further research is recommended.

Посилання

Alireza, B., Seyed, H. L., Mahmoud, G., & Seyed, M. M. (2023). Laboratory investigation on the effect of waste plastic bottles filled with soil as transverse members on pullout resistance of steel strip for reinforcement fine sand, Rock and Soil Mechanics, 43(11), 3073-3082. DOI: 10.16285/j.rsm.2021.00146

Ang, F. (2023). Opportunities and challenges of recycled plastic building materials in the construction industry of the Philippines. [Master’s Thesis, FH JOANNEUM: University of Applied Sciences]. https://epub.fh-joanneum.at/obvfhjhs/content/titleinfo/9639841/full.pdf

ASTM International. (2020). ASTM D792: Standard test methods for density and specific gravity (relative density) of plastics by displacement. https://www.astm.org/d0792-20.html

ASTM International. (2023). ASTM D695-23: Standard test method for compressive properties of rigid plastics. https://www.astm.org/d0695-23.html

Lamba, P., Kaur, D. P., Raj, S., & Sorout, J. (2021). Recycling/reuse of plastic waste as construction material for sustainable development: A review. Environmental Science and Pollution Research, 29(1), 1-14. https://doi.org/10.1007/s11356-021-16980-y

Nadaf, M.B., Dutta, S., & Mandal, J.N. (2019). Fly ash as backfill material in slopes using waste PET bottles as reinforcement. In S. Ghosh (Ed.), Waste Management and Resource Efficiency. Springer, Singapore. https://doi.org/10.1007/978-981-10-7290-1_76

Tafreshi, S. N. M., Omran, M. P., Rahimi, M., & Dawson, A. (2021). Experimental investigation of the behavior of soil reinforced with waste plastic bottles under cyclic loads. Transportation Geotechnics, 26, 100455. https://doi.org/10.1016/j.trgeo.2020.100455

World Bank. (2022). Reducing plastic waste in the Philippines: An assessment of policies and regulations to guide country dialogue and facilitate action. Washington, DC.